Cracked, hollow, popped or stained tiles on floors and walls. Steer Builders replaces single tiles or whole areas and regrouts kitchens and bathrooms.
Tiles in Singapore homes take a lot: heat that makes them expand, heavy furniture, and water in kitchens and bathrooms. Over the years tiles crack, sound hollow when you tap them or suddenly pop up, and the grout darkens and lets water through to the floor below. In HDB flats and condos, water getting past bathroom tiles is one of the common causes of ceiling leaks in the unit below. We start by tapping the area to find every loose tile, not just the visibly broken ones. A tile that looks fine can already have lost its bond, and leaving it means another repair later. We also check for signs of water under the tiles, so we know whether there is a leak or waterproofing problem to fix first. Damaged tiles are removed carefully, the old adhesive cleared and the bed levelled, then new tiles are set with proper adhesive and expansion gaps. We try to match the existing tile, and if it is no longer made, we suggest a close match or a neat feature strip. Joints are grouted and cleaned so the repair blends in with the rest of the floor or wall. For larger jobs we re-tile whole rooms, overlay old tiles where the floor allows it, and regrout or epoxy-grout bathrooms and kitchens. We work on living room floors, kitchen backsplashes, bathroom walls and floors, balconies and outdoor areas in HDB flats, condos, landed houses, shophouses and commercial units. Where water has been getting under the tiles, we fix the leak or the waterproofing first, so the new tiles stay put. Because our team also handles plumbing and painting, one contractor can take care of the cause, the tiles and the finishing touches.
Tap any item to ask for a quote
Cracked tile replacement
We replace single cracked tiles or small patches without redoing the whole floor. Replacement tiles are matched to the existing size and colour where possible.
Hollow and popped tile repair
Loose and popped tiles are lifted, the old adhesive cleared and the tiles re-bedded and reset. Expansion gaps are added so they do not lift again in the heat.
Floor re-tiling and overlay
We re-tile whole rooms, either by hacking out old tiles or by overlaying new tiles where the floor is sound. Overlay can reduce noise, dust and time on site.
Wall tiles
We tile and repair kitchen backsplashes and bathroom walls. Loose or cracked wall tiles are replaced and the joints sealed to keep water out.
Regrouting and epoxy grout
Old, stained or crumbling grout is removed, refilled and sealed. Epoxy grout is an option for bathrooms and kitchens as it resists stains and water better.
Balcony and outdoor tiles
We lay slip-resistant tiles with proper falls so rain drains away. This matters in Singapore's heavy downpours, where standing water can seep into walls and floors.
If you notice any of these, it is time for an inspection.
Tiles lifting or tenting with a loud crack need urgent attention. Keep people off the area. Broken tile edges can be sharp and the surrounding tiles may also be loose.
A hollow tile has lost its bond and will crack or lift soon. It is common in older homes and in rooms that get a lot of sun. Re-bedding it early is simpler than dealing with a popped floor.
Cracks let water under the tile and spread over time. In wet areas this can damage the screed and waterproofing below. Replacing the tile early keeps the problem small.
Old grout absorbs water and stains. Gaps in grout let water reach the floor bed. Regrouting makes floors look new and seals them again.
Failed grout or waterproofing lets water reach the floor below. In HDB flats and condos this often shows up as a ceiling stain in the unit underneath. It should be checked before it causes more damage.
Re-tiling a kitchen or bathroom refreshes the whole room. Overlaying new tiles can be done with less hacking where the floor is sound. It is a good time to also fix any hidden leaks.
Homes and businesses across Singapore, islandwide.
HDB flats
Condominiums
Landed houses
Shophouses
Offices
Retail units
We look at why tiles failed, such as moisture or movement, before re-laying. If there is a leak or failed waterproofing, it is fixed first. That way the new tiles do not fail for the same reason.
Proper spacing and levelling so tiles sit flat and lines run straight. Expansion gaps are left where needed. The result is a floor that looks neat and does not trip anyone up.
We try to match the existing tile size and colour for small repairs. If an exact match is not available, we suggest the closest option. A planned contrast strip is another neat solution.
Debris removed and the area cleaned when we finish. Surrounding floors and fixtures are protected during the work. Old tiles and rubble are taken away.
Small repairs often in one day
Show us the damaged tiles and the area around them. A close-up of one tile helps us look for a match.
We find every hollow tile and check for water underneath. This tells us the true size of the repair.
Price, tile match options and timing in writing. Work starts only after you agree.
Tiles set, grouted and cleaned, ready to use. We tell you when the area can take normal use again.
Keep everyone off the area and send us photos on WhatsApp. We will arrange the earliest visit we can.
Fix them before they crack or lift. Tap your floors now and then with a coin or knuckle. A dull, hollow sound means the tile is coming loose.
It keeps water out of the floor below. Bathroom and kitchen grout wears with daily cleaning and moisture. Check it for cracks and gaps from time to time.
They make future repairs easy to match. Tile designs are often discontinued after a few years. Store spares in a dry place with the box label.
They damage grout and tile glaze. Use a mild, neutral cleaner for daily mopping. For tough stains, ask what is safe for your tile type.
Usually heat expansion with no gaps left at the edges, or old adhesive that has lost its grip. Singapore's heat and direct sunlight make tiles expand, and without room to move they push up. We reset them with expansion gaps so it does not happen again. We also check the nearby tiles, since they are often loose too.
We try. Send us a close-up photo, and if you have any spare tiles, let us know. If the tile is no longer made, we suggest the closest match or a deliberate contrast strip. Either way, we explain the options before work starts.
No. Loose or cracked tiles can be replaced on their own. For a full new look, overlaying new tiles on old ones is often possible. We check whether the existing floor is sound enough for overlay before recommending it.
Light use after about 24 hours. We tell you on the day based on the adhesive used. Grout also needs time to set before mopping or heavy cleaning. Avoid moving heavy furniture onto the area until we confirm it is ready.
Not on the list? Ask us on WhatsApp.
Tell us about the damaged tiles.
Tile work. Tap to enlarge.
